- Introduction
- Careers
- Online Service
- E-Mail Us
- Contact Us
Order Online
Home > productsEPM 321 Micaceous Iron Oxide Epoxy Intermediate Paint
Offers Valid While Stocks Last
Discount Price: ¥ 20 per kg
Packaging:Two-Pack, A:B=25:2.5(27.5kg/set)
Color:Red brown
Stock:220kg (8 sets)
Shipping:Due to the nature of coating, our shipping service is currently only available in China Mainland. FREE shipping for orders over 500 kg; For orders below 500kg, customers could either pay the extra shipping fee or pick up your coatings from us.
Click here to check our address
Click here to check our address
Color:Red brown
Storage Life:12 months
Volume Solids:80%
Theoretical Coverage:5.33 m²/Kg with 100 microns of dry film thickness. For practical coverage, allow to 1.4~1.7 of loss factors.
Mix Ratio:25:2.5
Application Method:Airless spray, conventional spray, brush or roller.
Product Description:Storage Life:12 months
Volume Solids:80%
Theoretical Coverage:5.33 m²/Kg with 100 microns of dry film thickness. For practical coverage, allow to 1.4~1.7 of loss factors.
Mix Ratio:25:2.5
Application Method:Airless spray, conventional spray, brush or roller.
Two packages, grey, red or brown primer or intermediate paint. this paint is a highly shielded material and contains scale pigment γ- Fe₂O₃ with higher pigment volume concentration, which can overlap, arrange parallels and form an orientation similar to overlapping structure of “fish scale”. Therefore, possesses higher sealing property. In addition, it forms a coating with good resistance to heat and corrosion, and able to match with most of paints.
Intended Uses:
Used as anti-corrosive coating or additional layer for anti-corrosive coating, which will enhance sealing and anti-corrosion properties .
Surface Preparation:
The primer painted surfaces should be clean, dry and free from contamination.
Recommended coat: Spray one coats with high-pressure airless spray, which makes the dry film thickness reach 100 microns of dry film thickness.
Preceding coat: Epoxy zinc-rich shop primer, Epoxy zinc dust primer, Iron red epoxy shop primer, inorganic zinc silicate shop primer, wash primer etc.
Subsequent coat: Polyurethane finish, High-build epoxy finish, Epoxy deck paint, Chlorinated rubber finish, Chlorosulphonated polyethylene anti-corrosive paint, Alkyd hold paint, Alkyd spar paint, Alkyd ship hull paint, High-build coal-tar epoxy paint etc.
Precautions:
Store in cool and dry conditions, keep it away from heat.
The storage life is 12 months, if it’s been expired, do not use it unless it has been qualified again by a series of inspections.
Keep all application tools clean.
Enough ventilation is necessary at application site.
For more details please read the Product Data Sheet.