Marine
Home > Products > Protective > MarineOsaka Paint has a wide range of paints suitable for offshore installations to deal with different oceanic corrosion challenges.
Underwater Hull:Soaked in water, around with electrochemical corrosion and flushing. Osaka Paint has a broad range of alkalic-resistance products that offer prevention from fouling and marine growth immigration.
Waterline:the most corrosive part on a vessel, paint must has good abilities of humid-dry cycling resistance, abrasion resistance and impact resistance.
Decks and Topsides:need a tough coating system to protect them from corrosion, abrasion and sunlight degradation. Meanwhile deck coatings need to be skid-proof and abrasion resistant.
Liquid Tanks:include ballast tank, fuel tank, water tank and lube oil tank. Each kind needs its own coating system.
Long-lasting anti-corrosion, in C5 (ISO12944), its service life is 3~5 years, easy to be recoated and maintained. The finish has good abilities of color retention,chalking resistance and skid resistance.
Waterline:the most corrosive part on a vessel, paint must has good abilities of humid-dry cycling resistance, abrasion resistance and impact resistance.
Decks and Topsides:need a tough coating system to protect them from corrosion, abrasion and sunlight degradation. Meanwhile deck coatings need to be skid-proof and abrasion resistant.
Liquid Tanks:include ballast tank, fuel tank, water tank and lube oil tank. Each kind needs its own coating system.
Regular Deck Coating System:
Primer | Deck Universal Primer | 120 um |
Intermediate | Skid-Proof Deck Intermediate Paint (Roller) | 1-3 um |
Finish | High Durability Deck Finish | 60 um |
Products for Vessel
- CR 102 Chlorinated Rubber Intermediate Coating _ Fini...
- CR 106 Chlorinated Rubber Primer
- EPE 331 High-Build Epoxy Finish
- EPE 332 High-Solid and Low Surface Preparation Epo...
- EPE 336 Epoxy Resin Finish
- EPF 337 Epoxy Finish for Winter
- EPF 339 Modified Epoxy Resin Anti-Abrasion Finish
- EPM 321 Micaceous Iron Oxide Epoxy Anticorrosive _ In...
- EPM 333 Epoxy Resin High-Build Intermediate Paint
- EPP 301 Iron Red Epoxy Resin Shop Primer
- EPP 302 Epoxy Iron Red Primer
- EPP 303 Zinc Phosphate Epoxy Primer
- EPP 304 Epoxy Aluminium Triphosphate Primer
- EPP 306 Epoxy Anticorrosive Primer
- EPP 308 Epoxy Universal Primer
- EPSP 396 Underwater Application Primer of Epoxy R...
- EPSP 400 Epoxy Resin Maintenance Paint of Tide Reg...
- EPSP 401 Solvent-Free Epoxy Anticorrosive Paint
- EPSP 402 Solvent-Free Epoxy Resin Tank Paint
- EPSP 403 Solvent-Free Epoxy Phenolic Paint
- EPSP 404 Solvent-Free Epoxy Glass Flake Paint
- EPTANK 362 Potable Water Tank Paint of Epoxy Res...
- EPTANK 364 Tank Paint of Epoxy Phenolic Resin
- EPTANK 366 Chemicals Tank Paint
- POSI 1701 Polysiloxane Finish
- PU 411 Polyurethane Recoatable Finish
- PU 412 Aromatic Polyurethane Finish
- PU 413 Aliphatic Polyurethane Finish
- PU 416 Polyurethane Primer
- PU 417 Polyurethane Bituminous Paint
- PU 418 Polyurethane Intermediate Paint
- PU 420 Polyurethane Finish for Engineering Automobile
- PU 421 Polyurethane Finish for Engineering Machinery
- PUS 412 Solvent-Free Flexible Deck Paint
- PUS 433 Solvent-Free Polyurethane Finish
- SFCP 1101 Fluorocarbon Paint (Finish)
- SHR 1800 Heat-Insulation Reflection Paint
- SMP 1401 Mark Paint
- ZICG 221 Cold Galvanized Paint
- ZIEP 212 Epoxy Zinc-Rich Primer
- ZIES 207 Epoxy Zinc-Rich Shop Primer
- ZIES 213 Inorganic Zinc-Rich Primer
- ZIES 214 Inorganic Zinc-Rich Shop Primer
- ZIES 218 Zinc Powder Hardener
- ZISI 208 Silicone Zinc Dust Primer
- High-Build Coal-Tar of Epoxy Paint for Winter EPCT...
- Coal-Tar Epoxy Anticorrosive Paint EPCT 380-1 Prim...
Antifouling:FPSO operate in static conditions,and fouling not only reduces the lifetime of underwater protective coatings, but also obstructs underwater inspection and reduces the payload of the floating unit.
Crude oil tanks:Crude oil abstracted from offshore oil fields contains water,acid and other corrosive chemicals. In addition the oil may be very hot when pumped into the crude oil tank. The coatings should handle both chemicals and high temperatures to guarantee continuous production of the FPSO, and to avoid interruptions caused by coating failures.
Temperature management:The pipes and valves of FPU work at extreme temperatures, Cold splash will cool steel down to -190ºC, while some pipes and valves work at 600ºC. It’s a crucial challenge to coatings in protecting structural integrity and functionality.
Osaka Paint Has developed a series applicable coatings for offshore Installation, e.g.:
Surface tolerant coatings, epoxy primer with rust, and high temperature coatings (from 200°C to 1200°C)
Distinguishing features:
1. Pull-Off Adhesion is more than 20MPa, which ensures the coatings could strongly attached to the substrate in sea.
2. Long term salt-resistant and toughness ability, high build low VOC coatings,great for offshore installations.
Crude oil tanks:Crude oil abstracted from offshore oil fields contains water,acid and other corrosive chemicals. In addition the oil may be very hot when pumped into the crude oil tank. The coatings should handle both chemicals and high temperatures to guarantee continuous production of the FPSO, and to avoid interruptions caused by coating failures.
Temperature management:The pipes and valves of FPU work at extreme temperatures, Cold splash will cool steel down to -190ºC, while some pipes and valves work at 600ºC. It’s a crucial challenge to coatings in protecting structural integrity and functionality.
Osaka Paint Has developed a series applicable coatings for offshore Installation, e.g.:
Surface tolerant coatings, epoxy primer with rust, and high temperature coatings (from 200°C to 1200°C)
Distinguishing features:
1. Pull-Off Adhesion is more than 20MPa, which ensures the coatings could strongly attached to the substrate in sea.
2. Long term salt-resistant and toughness ability, high build low VOC coatings,great for offshore installations.
Products for Offshore Installation
- CR 102 Chlorinated Rubber Intermediate Coating _ Fini...
- CR 106 Chlorinated Rubber Primer
- EPE 332 High-Solid and Low Surface Preparation Epo...
- EPM 321 Micaceous Iron Oxide Epoxy Anticorrosive _ In...
- EPM 333 Epoxy Resin High-Build Intermediate Paint
- EPP 302 Epoxy Iron Red Primer
- EPP 303 Zinc Phosphate Epoxy Primer
- EPP 304 Epoxy Aluminium Triphosphate Primer
- EPP 306 Epoxy Anticorrosive Primer
- EPP 308 Epoxy Universal Primer
- EPP 309 Epoxy Oil-Resistant Paint
- EPP 311 Epoxy Primer for Rusted Surface
- EPP 314 Epoxy Sealer _ Transition _ Connection Prim...
- EPSP 391 Coal-Tar Epoxy Glass Flake Paint
- EPSP 393 Epoxy Antistatic and Oil-Resistant Paint w...
- EPSP 394 Tank Coating of Epoxy Phenolic Resin
- EPSP 396 Underwater Application Primer of Epoxy R...
- EPSP 400 Epoxy Resin Maintenance Paint of Tide Reg...
- EPSP 409 Solvent-Free Epoxy Antistatic Paint for O...
- EPTANK 371 Epoxy Acid and Alkali Resistant Tank P...
- POSI 1701 Polysiloxane Finish
- PU 411 Polyurethane Recoatable Finish
- PU 412 Aromatic Polyurethane Finish
- PU 413 Aliphatic Polyurethane Finish
- PU 416 Polyurethane Primer
- PU 417 Polyurethane Bituminous Paint
- PU 418 Polyurethane Intermediate Paint
- PU 420 Polyurethane Finish for Engineering Automobile
- PU 421 Polyurethane Finish for Engineering Machinery
- PU 423 Polyurethane Varnish
- PUS 433 Solvent-Free Polyurethane Finish
- SFCP 1101 Fluorocarbon Paint (Finish)
- SG-JD High-Temperature Oxygen-Proof Paint (800-125...
- SMP 1401 Mark Paint
- TR 606 Heat-Resistant Silicone Aluminum Paint 500℃
- TR 607 Aluminium Alkyd Heat-Resistant Paint 200℃(T...
- TR 610 Heat and Humidity Resistant Primer 300℃
- TR 611 Heat and Humidity Resistant Finish 300℃
- TR 614 Heat-Resistant Silicone Finish 300℃
- TR 615 Heat-Resistant Finish 200℃
- TR 620 Heat-Resistant Anticorrosive Primer 300℃
- TR 623 Heat-Resistant Finish 150℃
- TR 627 High-Temperature Paint 800℃
- TR 629 Solvent-Free High-Temperature Resistant Pain...
- TR 630 High Temperature-Resistant Organic-Inorganic S...
- ZICG 221 Cold Galvanized Paint
- ZIEP 212 Epoxy Zinc-Rich Primer
- ZIES 207 Epoxy Zinc-Rich Shop Primer
- ZIES 213 Inorganic Zinc-Rich Primer
- ZIES 214 Inorganic Zinc-Rich Shop Primer
- ZISI 208 Silicone Zinc Dust Primer
- ZISI 208 Silicone Zinc Dust Primer
- High-Build Coal-Tar of Epoxy Paint for Winter EPCT...
- Coal-Tar Epoxy Anticorrosive Paint EPCT 380-1 Prim...
- High-Temperature Finish 600℃ TR 601-1 One pack; TR...
- Heat-Resistant Anticorrosive Primer 150℃ TR 625-1 O...
- Heat-Resistant Anticorrosive Primer 200℃ TR 621-1 O...
- Heat-Resistant Anticorrosive Primer 400℃ TR 617-1 O...
- Heat-Resistant Anticorrosive Primer 500℃ TR 616-1 O...
- Heat-Resistant Anticorrosive Primer 600℃ TR 608-1 O...
- High-Temperature Paint 700℃ TR 626-1 One pack; TR ...
- Heat-Resistant Silicone Aluminum Paint 600℃ TR 603...
- Heat-Resistant Silicone Finish 400℃ TR 613-1 One pac...
- Heat-Resistant Silicone Finish 500℃ TR 612-1 One pac...