There is at least one area in a factory workshop under high load weight, high impact and intensive abrasion.Without a proper industrial flooring system, the concrete floor is easy to be cracked and twisted, which causes expensive repairs costs and potential danger.
The lightweight industrial flooring system can’t take high strength abrasion and impact, which might cause the interior damage of concrete slabs. Please consult with us in detail before you choosing any flooring systems.
Applicable to the heavy load, strong abrasion and chemical corrosion areas, to deal with heavy load forklifts and trucks, no matter solid tire or air tire. Typical applications: vehicle production workshops, paper making workshops, steel workshops and large scale warehouses.
2.High resistance to abrasion
3.Clean and green application
4.Good adhesion with concrete base
5.Chemical and liquids resistance
The lightweight industrial flooring system can’t take high strength abrasion and impact, which might cause the interior damage of concrete slabs. Please consult with us in detail before you choosing any flooring systems.
Recommend Flooring System:
|
Applicable to the heavy load, strong abrasion and chemical corrosion areas, to deal with heavy load forklifts and trucks, no matter solid tire or air tire. Typical applications: vehicle production workshops, paper making workshops, steel workshops and large scale warehouses.
Technical Data
Item | Data | Test Condition |
Anti-pressure strength | ≥90MPa | GB1041 |
Resistance to abrasion | ≤20mg | GB1768(750gf, 500N) |
Walkable time | about 24 hours (25°C) | |
Adhesion strength | ≥2.2MPa | GB5210, with concrete |
Extension strength | ≥9.5MPa | GB13022 |
Resistance to impact | 50kg.cm | GB/T1732 Topcoat |
Surface hardness | ≥3H | Pencil hardness |
Smooth coefficients | 60 | Dry |
Smooth coefficients | 90 | Watered |
Gloss | ≥80% | 60°∠specular reflectance |
Resistance to Chemicals (20°C, 1 month soak):
PH=1 H2SO4; HCI | No Change |
20% H2SO4; HCI | Slight discoloration or gloss loss |
5% NaOH | No Change |
20% NaOH | Slight discoloration or gloss loss |
CaOH2 | Slight discoloration or gloss loss |
5% ammonia | Slight discoloration or gloss loss |
BaCO3 | No Change |
Na2CO3 | No Change |
CaCl2 | No Change |
Formaldehyde | Slight discoloration or gloss loss |
Mineral oil | No Change |
H2O2 | Slight discoloration or gloss loss |
Features:
1.High resistance to impact2.High resistance to abrasion
3.Clean and green application
4.Good adhesion with concrete base
5.Chemical and liquids resistance
Typical Flooring System:
|
Applicable to the regular load, abrasion and chemical corrosion areas. Typical applications: assembly workshops, mechanical equipment workshops, electronics workshops and super markets. It could afford light weight forklifts and small trucks.
Features:
1.Smooth, flat and clean2.Resistance to a wide range of chemicals
3.Resistance to abrasion
4.Resistance to a certain degree of impact and weight
Technical Data
Item | Data | Test Condition |
Anti-pressure strength | ≥80MPa | GB1041 |
Resistance to abrasion | ≤20mg | GB1768(750gf, 500N) |
Walkable time | about 24 hours (25°C) | |
Adhesion strength | ≥2.2MPa | GB5210, with concrete |
Extension strength | ≥9.5MPa | GB13022 |
Resistance to impact | 50kg.cm | GB/T1732 Topcoat |
Surface hardness | ≥3H | Pencil hardness |
Smooth coefficients | 60 | Dry |
Smooth coefficients | 90 | Watered |
Gloss | ≥80% | 60°∠specular reflectance |
Resistance to Chemicals (20°C, 1 month soak):
PH=1 H2SO4; HCI | No Change |
20% H2SO4; HCI | Slight discoloration or gloss loss |
5% NaOH | No Change |
20% NaOH | Slight discoloration or gloss loss |
CaOH2 | Slight discoloration or gloss loss |
5% ammonia | Slight discoloration or gloss loss |
BaCO3 | No Change |
Na2CO3 | No Change |
CaCl2 | No Change |
Formaldehyde | Slight discoloration or gloss loss |
Mineral oil | No Change |
H2O2 | Slight discoloration or gloss loss |
Using waterborne and solvent-free products, no VOC, no smell, and no heavy metals, specially for the workshops with strict requirements and indoor environments regulations, such as tobacco industry,pharmaceutical industry with GMP standards, food industry and so on.
Suitable for the clean area: GMP 100 grade, dust particle size>0.5 mm, number of dust grain <3500/m3
Suitable for the clean area: GMP 10000 grade, dust particle size >0.5 mm, number of dust grain <35000/m3
Clean area flooring system:
|
Control area flooring system:
|
Suitable for the clean area: GMP 10000 grade, dust particle size >0.5 mm, number of dust grain <35000/m3
Technical Data:
Item | Data | Test Condition |
Anti-pressure strength | ≥80MPa | GB1041 |
Resistance to abrasion | ≤20mg | GB1768(750gf, 500N) |
Walkable time | about 24 hours (25°C) | |
Adhesion strength | ≥2.2MPa | GB5210, with concrete |
Extension strength | ≥9.5MPa | GB13022 |
Resistance to impact | 50kg.cm | GB/T1732 Topcoat |
Surface hardness | ≥3H | Pencil hardness |
Smooth coefficients | 60 | Dry |
Smooth coefficients | 90 | Watered |
Gloss | ≥80% | 60°∠specular reflectance |
Resistance to Chemicals (20°C, 1 month soak):
PH=1 H2SO4; HCI | No Change |
20% H2SO4; HCI | Slight discoloration or gloss loss |
5% NaOH | No Change |
20% NaOH | Slight discoloration or gloss loss |
CaOH2 | Slight discoloration or gloss loss |
5% ammonia | Slight discoloration or gloss loss |
BaCO3 | No Change |
Na2CO3 | No Change |
CaCl2 | No Change |
Formaldehyde | Slight discoloration or gloss loss |
Mineral oil | No Change |
H2O2 | Slight discoloration or gloss loss |
Regular area flooring system:
|
Technical Data:
Item | Data | Test Condition |
Anti-pressure strength | ≥70MPa | GB1041 |
Resistance to abrasion | ≤40mg | GB1768(750gf, 500N) |
Walkable time | about 16 hours (25°C) | |
Adhesion strength | ≥2.2MPa | GB5210, with concrete |
Extension strength | ≥7MPa | GB13022 |
Resistance to impact | 50kg.cm | GB/T1732 Topcoat |
Surface hardness | ≥2H | Pencil hardness |
Resistance to Chemicals (20°C, 1 month soak):
PH=1 H2SO4; HCI | No Change |
20% H2SO4; HCI | Slight discoloration or gloss loss |
5% NaOH | No Change |
20% NaOH | Slight discoloration or gloss loss |
CaOH2 | Slight discoloration or gloss loss |
5% ammonia | Slight discoloration or gloss loss |
BaCO3 | No Change |
Na2CO3 | No Change |
CaCl2 | No Change |
Formaldehyde | Slight discoloration or gloss loss |
Mineral oil | No Change |
H2O2 | Slight discoloration or gloss loss |