Power Generation
Home > Products > Protective > Power GenerationPower plant often needs the coating with special requirements, such as: fuel and gas erosion, chemical corrosion, flue gas desulfurization, high temperature corrosion, fuel and chemicals storage and so on.
Osaka Paint provides a full range of coating protection scheme, covering all parts of the power industry, including traditional power plant, hydro power plant, wind power plant,solar energy plant, bio-power plant and so on.
Osaka Paint provides a full range of coating protection scheme, covering all parts of the power industry, including traditional power plant, hydro power plant, wind power plant,solar energy plant, bio-power plant and so on.
The steel structures of power plant includes the ordinary steel structures, the high temperature equipments
(furnace, turbine) and other steel tanks. Power plant often locates in C5I-M ISO12944 environment.
The coating system for ordinary outdoor steel structures:
2.The operational life of this coating system is ≥5 years.
3.Easy to be applied, various application methods suitable, e.g.roller, brush or spray.
4.There are a wide range of colours available, meanwhile applicable on different substrates, such as metal, PVC,PP and ABS.
The coating system for ordinary outdoor steel structures:
Primer | ZIEP212 Epoxy Zinc-Rich Primer | 80 um |
Intermediate | EPM321 M.I.O Epoxy Intermediate Paint | 160 um |
Finish | PU413 Aliphatic Polyurethane Finish | 80 um |
Distinguishing features:
With Zinc-Rich Primer and more than 320um total coatings film thickness, the effective anticorrosion life could last more than 15 years.The coating system for high temperature equipments:
Primer | ZIEP213 Inorganic Zinc-Rich Primer | 80 um |
Finish | TR Heat-Resistant Finish Series | 80 um |
Distinguishing features:
Osaka Paint’s high temperature coatings not just enhance the scratch resistance ability of coating film, but also increase the anticorrosion life of high temperature equipments, and strengthen antioxidant effect. This coating system resistants to temperature≥400°C, and its anticorrosion life≥10 years.The coating system for the inner surface of fuel tank:
Primer | Zinc-Rich Primer Series | 60 um |
Finish | EPSP 394 Tank Coating of Epoxy Phenolic Resin | 200 um |
Distinguishing features:
1.The focal point of coating system design of the inner surface of fuel tank is anticorrosion and antistatic effect, and good antistatic effect could steady the working life of fuel tank,therefore increase the safety of fuel tank.2.The operational life of this coating system is ≥5 years.
3.Easy to be applied, various application methods suitable, e.g.roller, brush or spray.
4.There are a wide range of colours available, meanwhile applicable on different substrates, such as metal, PVC,PP and ABS.
Products for Steel Structure
- AC 501 Etch Primer
- ACP 1001 Acrylic Finish for Machinery
- ACP 1006 Acrylic Iron Red Primer _ Intermediate Pai...
- AL 053 Alkyd Finish
- AL 054 Alkyd Anticorrosive Primer
- AL 055 Alkyd Ready Mixed Paint
- AL 063 Alkyd Enamel
- CP 164 Chlorosulphonated Polyethylene Primer
- CP 172 Chlorosulphonated Polyethylene Finish
- CPR 003 Acrylic Rubber Finish
- CR 102 Chlorinated Rubber Intermediate Coating _ Fini...
- CR 106 Chlorinated Rubber Primer
- EPE 312 Epoxy Ester Iron Red Primer
- EPE 315 Modified Epoxy Ester Intermediate Paint
- EPE 331 High-Build Epoxy Finish
- EPE 332 High-Solid and Low Surface Preparation Epo...
- EPE 336 Epoxy Resin Finish
- EPF 334 Epoxy Resin Varnish
- EPF 337 Epoxy Finish for Winter
- EPF 339 Modified Epoxy Resin Anti-Abrasion Finish
- EPM 321 Micaceous Iron Oxide Epoxy Anticorrosive _ In...
- EPM 333 Epoxy Resin High-Build Intermediate Paint
- EPP 301 Iron Red Epoxy Resin Shop Primer
- EPP 302 Epoxy Iron Red Primer
- EPP 303 Zinc Phosphate Epoxy Primer
- EPP 304 Epoxy Aluminium Triphosphate Primer
- EPP 306 Epoxy Anticorrosive Primer
- EPP 308 Epoxy Universal Primer
- EPP 309 Epoxy Oil-Resistant Paint
- EPP 310 One Pack Fast Drying Anticorrosive Primer
- EPP 311 Epoxy Primer for Rusted Surface
- EPSP 390 Epoxy Glass Flake Paint
- EPSP 391 Coal-Tar Epoxy Glass Flake Paint
- EPSP 393 Epoxy Antistatic and Oil-Resistant Paint w...
- EPSP 394 Tank Coating of Epoxy Phenolic Resin
- EPSP 400 Epoxy Resin Maintenance Paint of Tide Reg...
- F01-15 Phenolic Varnish
- F04-11 Phenolic Enamel
- F53-33 Iron Red Phenolic Anticorrosive Paint
- HCP 142 Highly Chlorinated Polyethylene Primer
- HCP 143 Highly Chlorinated Polyethylene Anticorrosive...
- HCP 145 Highly Chlorinated Polyethylene Finish
- POSI 1701 Polysiloxane Finish
- PU 411 Polyurethane Recoatable Finish
- PU 412 Aromatic Polyurethane Finish
- PU 413 Aliphatic Polyurethane Finish
- PU 416 Polyurethane Primer
- PU 417 Polyurethane Bituminous Paint
- PU 418 Polyurethane Intermediate Paint
- PU 420 Polyurethane Finish for Engineering Automobile
- PU 421 Polyurethane Finish for Engineering Machinery
- PU 423 Polyurethane Varnish
- PU 430 Polyurethane Primer-Top Syncretic Paint
- SFCP 1101 Fluorocarbon Paint (Finish)
- TR 607 Aluminium Alkyd Heat-Resistant Paint 200℃(T...
- TR 610 Heat and Humidity Resistant Primer 300℃
- TR 611 Heat and Humidity Resistant Finish 300℃
- TR 614 Heat-Resistant Silicone Finish 300℃
- TR 615 Heat-Resistant Finish 200℃
- TR 620 Heat-Resistant Anticorrosive Primer 300℃
- TR 623 Heat-Resistant Finish 150℃
- ZICG 221 Cold Galvanized Paint
- ZIEP 212 Epoxy Zinc-Rich Primer
- ZIES 207 Epoxy Zinc-Rich Shop Primer
- ZIES 213 Inorganic Zinc-Rich Primer
- ZIES 214 Inorganic Zinc-Rich Shop Primer
- ZIES 218 Zinc Powder Hardener
- ZISI 208 Silicone Zinc Dust Primer
- High-Build Coal-Tar of Epoxy Paint for Winter EPCT...
- Coal-Tar Epoxy Anticorrosive Paint EPCT 380-1 Prim...
- Heat-Resistant Anticorrosive Primer 150℃ TR 625-1 O...
- Heat-Resistant Anticorrosive Primer 200℃ TR 621-1 O...
According to the different corrosive mediums of FGD equipments, Osaka Paint uses imported raw materials, developed a series of SPE glass flake paints,which are typically used for the inner surface of FGD equipment. They could efficiently decrease the emissions of sulphur and nitrogen oxides, extend the operational life of FGD equipment, hence reduce the possible maintenance cost and time of FGD system.
Operation Temperature: Max 180°C
The different FGD systems and different anti corrosion locations requirement different coating systems, please consult our company for more details.
Typical coating system for FGD system:
Operation Temperature: Max 180°C
The different FGD systems and different anti corrosion locations requirement different coating systems, please consult our company for more details.
Products for Desulfurization
- SPE 902-M Glass Flake Vinyl Ester Paint
- SPE 902-P Vinyl Ester Primer
- SPE 902 Vinyl Ester Finish
- SPE 903-M Abrasive and Seepage Resistant Glass Flak...
- SPE 903-P Abrasive and Seepage Resistant Vinyl Este...
- SPE 903 Abrasive and Seepage Resistant Vinyl Ester F...
- SPE 904-M Heat-Resistant Glass Flake Vinyl Ester P...
- SPE 904-P Heat-Resistant Vinyl Ester Primer (≤200...
- SPE 904 Heat-Resistant Vinyl Ester Finish (≤200℃)
The pipeline in power plant usually locates below the surface, hence under the corrosion of water and soil (Im1-3 ISO12944). Osaka Paint offers a variety of targeted coating system solutions for pipeline, concrete gate and other different underground structures.
Typical coating system for external wall of pipe (Im3):
Layer | Coal-Tar Epoxy Anticorrosive Paint + Glass-Fabric | 800 um |
Typical coating system for internal wall of pipe:
Primer | Zinc-Rich Primer Series | 60 um |
Finish | Solvent-Free Epoxy Paint Series | 200 um |
Typical coating system for concrete ditch:
The runny liquid in concrete ditches of power plant is gypsum slurry, which could corrode and flush the concrete. The above coating system could last more than 30 years.
Products for Pipelines
- EPE 332 High-Solid and Low Surface Preparation Epo...
- EPE 336 Epoxy Resin Finish
- EPF 337 Epoxy Finish for Winter
- EPF 339 Modified Epoxy Resin Anti-Abrasion Finish
- EPM 321 Micaceous Iron Oxide Epoxy Anticorrosive _ In...
- EPM 333 Epoxy Resin High-Build Intermediate Paint
- EPSP 390 Epoxy Glass Flake Paint
- EPSP 391 Coal-Tar Epoxy Glass Flake Paint
- EPSP 401 Solvent-Free Epoxy Anticorrosive Paint
- EPSP 402 Solvent-Free Epoxy Resin Tank Paint
- EPSP 403 Solvent-Free Epoxy Phenolic Paint
- EPSP 404 Solvent-Free Epoxy Glass Flake Paint
- SPE 902-M Glass Flake Vinyl Ester Paint
- SPE 902-P Vinyl Ester Primer
- SPE 902 Vinyl Ester Finish
- SPE 903-M Abrasive and Seepage Resistant Glass Flak...
- SPE 903-P Abrasive and Seepage Resistant Vinyl Este...
- SPE 903 Abrasive and Seepage Resistant Vinyl Ester F...
- SPE 904-M Heat-Resistant Glass Flake Vinyl Ester P...
- SPE 904-P Heat-Resistant Vinyl Ester Primer (≤200...
- SPE 904 Heat-Resistant Vinyl Ester Finish (≤200℃)
- ZIES 207 Epoxy Zinc-Rich Shop Primer
- ZIES 213 Inorganic Zinc-Rich Primer
- ZIES 214 Inorganic Zinc-Rich Shop Primer
- ZIES 218 Zinc Powder Hardener
- ZISI 208 Silicone Zinc Dust Primer
- High-Build Coal-Tar of Epoxy Paint for Winter EPCT...
- Coal-Tar Epoxy Anticorrosive Paint EPCT 380-1 Prim...