- Introduction
- Careers
- Online Service
- E-Mail Us
- Contact Us
Order Online
Home > productsFPP 502 Epoxy Primer Sealer
Offers Valid While Stocks Last
Discount Price: ¥ 24 per kg
Packaging:Packaging: Two-Pack, A:B=16:4(20kg/set)
Color:Light transparent yellow
Stock:560kg (28sets)
Shipping:Due to the nature of coating, our shipping service is currently only available in China Mainland. FREE shipping for orders over 500 kg; For orders below 500kg, customers could either pay the extra shipping fee or pick up your coatings from us.
Click here to check our address
Click here to check our address
Color:Light transparent yellow
Storage Life:12 months
Volume Solids:60%
Theoretical Coverage:11 m²/Kg with 50 microns of dry film thickness. For practical coverage, allow to 1.4~1.7 of loss factors.
Mix Ratio:16:4
Application Method:Airless spray, conventional spray, brush or roller.
Product Description:Storage Life:12 months
Volume Solids:60%
Theoretical Coverage:11 m²/Kg with 50 microns of dry film thickness. For practical coverage, allow to 1.4~1.7 of loss factors.
Mix Ratio:16:4
Application Method:Airless spray, conventional spray, brush or roller.
Two packages sealer primer, can reinforce the adhesion of composite coats to substrate.
Intended Uses:
As primer sealer, suited for treating the surface of cement or concrete floor to be applied, as well as terrazzo and marble surface.
Surface Preparation:
Consult our company about the detail application information of the floor paint. If new floor is to be painted, the application should not start unless its construction was completed at least 20 days ago and water content of the substrate should be less than 8%. Before application with this paint product, all cracks, joints, protrudent and hollow spots on the floor should be filled up and repaired correctly.
Must mix component A and B according to the practical necessary quantity. Recommend making this paint just before painting with it. Should stir to even before application. It should be used up in its pot life in case it would cure and could not be used.If the substrate is highly porous, recoated with this primer sealer several times so that the substrate should be sealed up, in case pinholes or bubbles would take place after the next coat. May paint the next coat after the film is hard dry.
Precautions:
Store in cool and dry conditions, keep it away from heat.
The storage life is 12 months, if it’s been expired, do not use it unless it has been qualified again by a series of inspections.
Keep all application tools clean.
Enough ventilation is necessary at application site.
For more details please read the Product Data Sheet.