- Introduction
- Careers
- Online Service
- E-Mail Us
- Contact Us
![](../images/left-contact.jpg)
Order Online
Home > products![](../uploads/image/20151026/1445834112.jpg)
EPP306 Epoxy Anticorrosive Primer
Offers Valid While Stocks Last
Discount Price: ¥ 19 per kg
Packaging:Two-Pack, A:B=18:3 (21kg/set)
Color:Light iron red
Stock:stocks 210kg(10sets)
![](../images/zixun-3.jpg)
Shipping:Due to the nature of coating, our shipping service is currently only available in China Mainland. FREE shipping for orders over 500 kg; For orders below 500kg, customers could either pay the extra shipping fee or pick up your coatings from us.
Click here to check our address
Click here to check our address
Color: Light iron red
Storage Life:12 months
Volume Solids:58%
Theoretical Coverage:5.73 m²/Kg with 75 microns of dry film thickness. For practical coverage, allow to 1.4~1.7 of loss factors.
Mix Ratio:18:3
Application Method:Airless spray, conventional spray, brush or roller.
Product Description:Storage Life:12 months
Volume Solids:58%
Theoretical Coverage:5.73 m²/Kg with 75 microns of dry film thickness. For practical coverage, allow to 1.4~1.7 of loss factors.
Mix Ratio:18:3
Application Method:Airless spray, conventional spray, brush or roller.
Two packages fast dry epoxy primer, suitable for line production good abrasion resistance. Little mechanical damage, free from lead or chromium. Iron red or brown.
Intended Uses:
A kind of universal primer and applied for new built construction or repairing. Easy application. High performance epoxy anti-corrosive primer can be applied for the over spattered with acid and alkali or immersed at intervals, in place of zinc- rich primer. Suitable for overcoating with many high performance finishes.
Surface Preparation:
Remove grease to SSPC-SP1 by solvent cleaning. Where required, remove weld slag, smooth weld seams and sharp edges. The surface to be coated must be clean and dry.
Blasting: Blast clean to USA Standard SSPC-SP10(Sa2.5 ISO 8501:2007). Try to smooth, fill or properly treat the surface blemishes arisen from blasting. Overcoat with epoxy anti-corrosive paint, If oxidation happens, blasting should be conducted again in order to reach the specified standard.
Precoated Primer: Electro-welding joint or damage part must be blasted to USA Standard SSPC-SP10(Sa2.5ISO 8501:2007). If there are serious and scattered damages on the surface, completely sanding should be conducted.
Precautions:
Store in cool and dry conditions, keep it away from heat.
The storage life is 12 months, if it’s been expired, do not use it unless it has been qualified again by a series of inspections.
Keep all application tools clean.
Enough ventilation is necessary at application site.
For more details please read the Product Data Sheet.